LandingSite eTag Candy 1 Specification

the document can be downloaded from https://landingsite.cn/specs/landingsite-etag-candy-1-specification.pdf

Summary

LandingSite® eTag Candy 1 is an active tag that is fully compatible with Quuppa Intelligent Location System® ("QILS"). Any objects equipped with it can be located and tracked.

It uses an nRF52832 chip as its microcontroller, runs firmware based on Quuppa Tag Library 10.043, high-performance and stable.

It is small and light, both size and weight are smaller than the Quuppa QT1-1 tag.

It is waterproof because of its seamless housing, its IP rating is up to IP67 or higher.

It is very low-energy, a built-in CR2032 coin battery can last 1 year or more^[1]^.

[1] at 1 Hz transmission rate and 0 dBm transmission power.

Specifications

Product name	Candy 1
Model number	LS-TC1
Category	Safety communication equipment
Dimensions	Φ33mm × 9 mm
Weight	7.0 ± 0.5 g
Color	White, Green
Power supply	CR2032 coin battery, non-replaceable
Battery capacity	~225 mAh
Surface material	ABS plastic
IP protection class	IP67
Operating temp. range	0℃~60℃
Storage temp. range	-30℃~70℃
Carrier frequencies	2.4GHz ISM band
Wireless transmission method	BLE 5.2
Transmit frequency	2Hz(Default), [0.25,0.5,1,2,3,4,5,9,17,33,50]
Transmit power	-6dBm(Default), [-24,-18,-12,-6,0,6]

Features

DataData Packets Broadcast

Candy 1 broadcasts data packets continuously in a 2.4 GHz proprietary radio or in BLE 4.0 (or higher) protocol.

There are 2 types of data packets, DF packets and user data packets. QILS can scan and read the DF packets and calculate high-accuracy positions in real-time and get useful information from user data packets.

The transmission frequency and transmission power are both configurable.

Button

There is a button on the top centre of it. The button is used to activate the tag and stop some events.

LED indication

There is 1 RGB LED light on the top of it. The light will light when its button is pushed. Also, the lights could be controlled to blink remotely by QILS.

Accelerometer

It integrates an accelerometer, the 3-axises acceleration data will be sent as a part of user data packets.

Certifications

CE, Quuppa Approved